Найдено 46
Ничего не найдено
The analysis of different fracture toughness models for PVD coatings
SOWA S., SMOLIK J., KACPRZYŃSKA-GOŁACKA J., PIASEK A.
NON DESTRUCTIVE TESTING OF ALNICO ALLOYS
MŁYNARCZYK P., BAŃKOWSKI D., SPADŁO S., ZIARKOWSKI P., GRZĘDA J.
tomographic TESTING of alnico alloys
BAŃKOWSKI D., MŁYNARCZYK P., SPADŁO S., SÓJKA R., KLAMCZYŃSKI K.
Deposition of bactericidal AgO+CuO coatings using high-power pulsed magnetron sputtering technology (HPIMS) on polypropylene substrate
KACPRZYŃSKA-GOŁACKA J., SOWA S., ŁOŻYŃSKA M., BARSZCZ W., WIECIŃSKI P., SMOLIK J., KRASIŃSKI A.
REM-O-S COMPOUND INCLUSIONS GROWTH MODEL
GERASIN S., KALISZ D.
The Use of Reverse Engineering to Creating a Digital Model of Face Gear from 3D Point Cloud
SIKORSKA-CZUPRYNA S., GĄDEK-MOSZCZAK A.
DETERMINATION OF AUSTENITE DECOMPOSITION TEMPERATURES USING THERMODYNAMIC SW FACTSAGE
SNIEGOŇ M., TKADLEČKOVÁ M., WALEK J., CUPEK J., MERDER T., CHUDOBOVÁ L.
Analysis of problems with maintaining the desired quality of GAS SEALANT
SIWIEC D., DWORNICKA R., PACANA A.
Possibilities of using materials from steel dust recycling in the production of alloy steels
MAŁECKI S., GARGUL K., WARZECHA M., STRADOMSKI G., HUTNY A., MADEJ M., DOBRZYŃSKI M.
EFFECT OF TEMPERATURE CHANGE ON THE STEEL FLOW IN THE FIVE-STRAND ASYMMETRIC TUNDISH USING NUMERICAL MODELLING
CUPEK J., MICHALEK K., PIEPRZYCA J., HUCZALA T.
Analysis of the content of Technology Critical Metals in the e-waste
FORNALCZYK A., WILLNER J., JABLONSKA-CZAPLA M., GRYGOYC K., RACHWAL M.
hot plastic deformation behavior of new-developed multi-phase steel
WOJTACHA A., OPIELA M.
NEW METHOD OF BURR-LESS MICRO-BLANKING
PRESZ W., ARIVANANDAN V., CACKO R.
Low-Alloy Steel Electron Beam Hardening
ŚLIWIŃSKI P., KUBIK K., KOPYŚCIANSKI M.
Mechanically assisted laser forming hybrid method in metal expansion joints manufacturing
KURP P., DANIELEWSKI H.
Analysis of surface topography after micro-wire electrical discharge machining of nickel-based superalloy
ONISZCZUK-ŚWIERCZ D., ŚWIERCZ R., REMPALSKA M., KOWALIK T.
Microstructural characterization of oxide scales formed on γ–γ′ Co-Al-W-based superalloys
MIGAS D., MOSKAL G., CHMIELA B., MYALSKA-GŁOWACKA H.
High temperature transformation of Fe-bearing minerals in bentonite – Mössbauer spectroscopy studies
KĄDZIOŁKA-GAWEŁ M., KLIMONTKO J., WOJTYNIAK M.
IMPROVING THE QUALITY OF CASTINGS USED IN LIGHT VEHICLES
CZERWIŃSKA K., DWORNICKA R., PACANA A.
DEVELOPMENT OF TIN METALLURGY IN RWANDA
BANASIK Ł., MIŚKIEWICZ R., CHOLEWA-DOMANAGIĆ A., JANIK K., KOZŁOWSKI S.
Electrical discharge machining HOLEs on NICKEL-BASED ALLOYS
ONISZCZUK-ŚWIERCZ D., ŚWIERCZ R., CHMIELEWSKI T., SAŁACIŃSKI T.
USE OF THE THERMODYNAMIC DATABASE COMPUTHERM TO CONSTRUCT A REGRESSION EQUATION TO DETERMINE THE LIQUIDUS TEMPERATURE OF 41Cr4 STEEL
CHUDOBOVÁ L., WALEK J., SNIEGOŇ M., CUPEK J., MICHALEK K., SATERNUS M.
