Найдено 469
Ничего не найдено
Accuracy Improvement Method for Pixel-Selection Template Matching for Small-Scale FPGAs
NASU O., YONETA A., KAWAGISHI Y., HASHIMOTO M.
Q4
Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering,
2025,
цитирований: 0,
doi.org
「温度変化により生ずる工作機械変位データの機械学習に基づく短時間温度変化に対応した省エネ対応型熱変位補正システム」にまつわる話
KAWAMURA H., AIZAWA N., KAYANUMA T., KARAKI S.
Q4
Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering,
2025,
цитирований: 0,
doi.org
Wavelet Vision Transformer with Self-Supervised Learning for Improved Deepfake Detection
TAKASE S., YAMAUCHI Y.
Q4
Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering,
2025,
цитирований: 0,
doi.org
International Conference Report
藤 大.
Q4
Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering,
2025,
цитирований: 0,
doi.org
2024年度（第44回）精密工学会技術賞
Q4
Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering,
2025,
цитирований: 0,
doi.org
第3回 雑学に支えられて
OBIKAWA T.
Q4
Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering,
2025,
цитирований: 0,
doi.org
Development of High-Resolution Micro-Hole Torque Sensor and Small-Size High-Speed Processing Device
OGUCHI Y., OGUCHI K., SAKAKI K., NAKAYAMA N.
Q4
Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering,
2025,
цитирований: 0,
doi.org
Two-Step Structural Optimization Method for Meta-Mechanical Structures with Thermal Deformation Suppression
ISHIOKA S., MURAI N., SUGITA N., YAMADA T.
Q4
Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering,
2025,
цитирований: 0,
doi.org
JSPE Affiliate News
Q4
Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering,
2025,
цитирований: 0,
doi.org
「熟練技能に頼らず加工不良要因の特定を容易にする切削加工DX技術の開発」にまつわる話
KANEKO H., SATO G., FUJITA T.
Q4
Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering,
2025,
цитирований: 0,
doi.org
Study on Reduction of Burrs in Micro Slotting of Oxygen-Free Copper by Multistep Milling
NUNOBIKI M., KAJIWARA K., FUJIMOTO S.
Q4
Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering,
2025,
цитирований: 0,
doi.org
Information
Q4
Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering,
2025,
цитирований: 0,
doi.org
An Energy-Saving Thermal Displacement Correction System Responding to Short-Term Temperature Changes Based on Machine Learning of Data on Machine Tool Displacement Caused by Temperature Changes
KAWAMURA H., AIZAWA N., KAYANUMA T., KARAKI S.
Q4
Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering,
2025,
цитирований: 0,
doi.org
Improvement of Anomaly Detection Accuracy by Reducing the Camera Gap Based on Image Conversion Using Ideal Pair Images
HIRAMATSU N., KOBAYASHI H., AKIZUKI S., HASHIMOTO M.
Q4
Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering,
2025,
цитирований: 0,
doi.org
From the Lecture Committee
Q4
Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering,
2025,
цитирований: 0,
doi.org
Spindle-Integrated Cutting Force Measurement System
BOUJNAH H., YAMADA Y., KAWAI K., IMABEPPU Y., IRINO N.
Q4
Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering,
2025,
цитирований: 0,
doi.org
Evaluation of Dynamic Characteristics of Oil-Air Spindle Using Contact-Less Dynamic Spindle Tests
MATSUURA Y., YOKOHARA K., MATSUBARA A., TSURUTANI S.
Q4
Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering,
2025,
цитирований: 0,
doi.org
デジタルものづくり技術で北陸地域の産業界への貢献を目指す
Q4
Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering,
2025,
цитирований: 0,
doi.org
A Study on Waving Amplitude Suppression of Linear Motion Ball Guide
TAKAHASHI T., YAMAKOSHI R., OHASHI T., NOGUCHI S.
Q4
Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering,
2025,
цитирований: 0,
doi.org
Introduction to Design for Additive Manufacturing
TATENO T.
Q4
Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering,
2025,
цитирований: 0,
doi.org
Development of DX Technology for Machining Process Analysis to Identify Causes of Machining Defects without Relying on Skilled Operators
KANEKO H., SATO G., FUJITA T.
Q4
Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering,
2025,
цитирований: 0,
doi.org
「主軸一体型センサベース切削力計測システム」にまつわる話
BOUJNAH H., YAMADA Y., KAWAI K., IMABEPPU Y., IRINO N.
Q4
Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering,
2025,
цитирований: 0,
doi.org
Breakthroughs to a New Frontier in X-Ray
YAMADA J.
Q4
Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering,
2025,
цитирований: 0,
doi.org
工程集約による少量生産分野の高度化
DMG MORI CO., LTD.
Q4
Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering,
2025,
цитирований: 0,
doi.org
Trends and Future of Shape Modelling Research and Development
NAGAI Y.
Q4
Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering,
2025,
цитирований: 0,
doi.org
